Hot gas valve body

Hot Gas Valve Body is an ice maker replacement part identified by part number 1854704410. It’s intended for service and repair when the original component is worn, damaged, or missing. Use the part number on your machine or old component to confirm you’re ordering the correct item. This valve is part of the ice maker’s water-management system, controlling when water is allowed to flow into the unit during a fill sequence. If the valve sticks closed, the unit may not fill, leading to no ice or a cycle that stalls because there’s not enough water. When diagnosing fill problems, technicians often confirm the water supply is present, then check whether the valve is opening when commanded. Replacing the part can bring the system back to predictable operation and help prevent repeat call-backs. After replacement, check for leaks during a fill and verify the ice maker reaches a stable water level without overflowing. A careful inspection of adjacent parts can help catch secondary issues that may have contributed to the failure. Before closing panels, double-check that fasteners are snug and that nearby lines or wires won’t rub during operation. Before closing panels, double-check that fasteners are snug and that nearby lines or wires won’t rub during operation. A careful inspection of adjacent parts can help catch secondary issues that may have contributed to the failure. When possible, run the ice maker long enough to observe at least one complete cycle after the repair. If the symptom is intermittent, pay close attention to connectors, mounting points, and any signs of vibration-related wear. Before closing panels, double-check that fasteners are snug and that nearby lines or wires won’t rub during operation.