TXV DANFOSS

Start with the identifier: part 16-1130-01 is the Txv Danfoss replacement used during ice machine service. Order by part number to avoid mismatches. Reinstall carefully so nothing pinches, rubs, or binds once the unit is back together. Recheck fasteners and connectors after the first run-in cycle to confirm everything remains tight. Using the correct replacement part helps restore steady operation and reduces repeat service calls. Replacing a worn component early can prevent secondary damage to nearby parts. Technicians often replace this part after finding wear, cracking, or a poor fit during inspection. Technicians may encounter intermittent operation, repeat failure, or intermittent behavior depending on the application. If the issue is intermittent, look for vibration-related wear marks and connectors that shift under load. Check nearby components for secondary damage so the new part isn’t stressed immediately after installation. Once the underlying cause is addressed, downtime complaints usually reduce or disappear. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair.