SPRING SOLENOID ARM

Part R71007 refers to the Spring Solenoid Arm, typically replaced when wear, damage, or failure affects operation. It’s used in service work when the spring solenoid arm is worn, damaged, or no longer performing correctly. Match part R71007 to the removed spring solenoid arm and compare connectors, mounting points, and orientation before ordering. What it does: it regulates water or system flow depending on the application. When this valve starts to fail, you may see overfill, leaks, and no fill. Because the spring solenoid arm influences how the unit runs, symptoms may worsen under normal load. Technicians typically verify the fault before ordering the replacement. Service verification for the spring solenoid arm often includes: verify coil energizing (if applicable); check for debris contamination. After confirmation, replacing the spring solenoid arm with part R71007 restores the affected function and stabilizes operation. Ordering and installation go smoother when you verify the details first. After installing part R71007, check operation under load and look for leaks, vibration, or returning fault symptoms. Once part R71007 is installed and tested, the unit should return to normal performance with fewer intermittent issues. Document the symptom and the post-repair test result for future service history. If the unit has multiple revisions, confirm the exact configuration to avoid mismatched parts. Keep the removed part nearby for a quick side-by-side comparison during installation. Keep the removed part nearby for a quick side-by-side comparison during installation. Inspect related components so the new part isn’t exposed to the same stress that damaged the original. Document the symptom and the post-repair test result for future service history. Inspect related components so the new part isn’t exposed to the same stress that damaged the original. If the unit has multiple revisions, confirm the exact configuration to avoid mismatched parts.