drop tray

Part L232001723 corresponds to Drop Tray and is commonly sourced for ice maker repairs. Technicians typically replace this part when they’re seeing ice not dropping, visible wear, cracking, or a component that won’t stay seated. A solid approach is to confirm the symptom, then check mounting points and adjacent connections for secondary damage. Bin and tray components support ice handling and fitment. Damage can create rattles or interfere with normal drop/collection. A short post-repair check—visual inspection plus a full cycle—helps confirm the issue is resolved and nothing else is stressed. Once the root cause is corrected, performance should stabilize and output should return to normal. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period.