CONDENSER W/C

The component sold under part number 18-8767-25 is the condenser water cooled, commonly ordered for repair jobs. Technicians often source this part after verifying the installed component is cracked, out of tolerance, heat-damaged, seized, or otherwise unreliable. Always verify the brand family and machine series used on the service call so the replacement matches correctly. Where model references are available, cross-check the service model and revision level because similar machines can use different parts. Improves heat rejection and cooling performance when head pressure rises, output drops, or the unit overheats. Common service symptoms that can point toward this type of part include high head pressure symptoms, dirty or damaged coil replacement, and reduced cooling. Condenser problems can reduce heat rejection and drive higher operating temperatures that affect overall machine performance. For this condenser category, the typical repair goal is to restore the function that the failed component was affecting. During diagnosis, the part number should be matched first, then the circuit or assembly should be tested to confirm the failure path. Condenser-related diagnosis typically includes coil inspection, airflow evaluation, fan performance checks, and confirmation of restricted or damaged sections. A quick inspection of wiring, connectors, mounting hardware, and surrounding components can prevent a repeat failure after replacement. Using the exact replacement part number after diagnosis helps correct the issue at the source instead of masking the symptom temporarily. For ordering, match the part number exactly and compare the removed component to the replacement before installation. That step matters on commercial ice equipment because similar-looking parts can have different ratings, connectors, or mounting details. If you are troubleshooting symptoms such as not turning on, no power, not cooling, not starting, intermittent operation, error code behavior, or ice not dropping, confirming the failed component first will make this replacement more effective.