OVERLOAD

If your repair notes call for 18-8746-23, the requested component is the overload. Replacement is usually considered after inspection confirms wear, damage, electrical failure, or a repeat operating issue tied to this component. Always verify the brand family and machine series used on the service call so the replacement matches correctly. Where model references are available, cross-check the service model and revision level because similar machines can use different parts. Protects and resets the compressor circuit when overheating or overload conditions cause shutdown and restart problems. Depending on the machine setup, failures in this part category can show up as restarts after cooling, hot shutdowns, and compressor trips. An overload protector issue may appear as shutdown after heating and restart only after the system cools down. For this overload protector category, the typical repair goal is to restore the function that the failed component was affecting. Before ordering, technicians usually confirm the part number, inspect adjacent components, and test the affected circuit or mechanism. Overload diagnosis often includes checking compressor amperage, terminal condition, and ventilation issues that may trigger thermal trips. If the machine has a history of intermittent faults, reviewing recent service notes can help confirm whether this component is the primary failure. Once the failed part is confirmed, replacing it with the correct item can restore normal function and prevent ongoing intermittent complaints. The best results come from matching the part number to the machine and replacing it only after the failure has been confirmed. Symptoms such as not turning on, no power, not cooling, not starting, intermittent operation, error code faults, or ice not dropping may point to this part category, but technicians should verify the complete failure path to make the repair stick.