Txv An 1/2 Sz - Part obsolete, USE 16-1183-02

Part 16-1117-03 is used when replacing Txv An 12 Sz Part Obsolete use 16 1183 02 after inspection confirms wear or damage. (Note: listing shows obsolete; use 16-1183-02 when applicable.) Order by part number to avoid mismatches. Confirm the symptom first, then inspect the part location for wear, corrosion, cracks, or looseness. If the issue is intermittent, look for vibration-related wear marks and connectors that shift under load. Once the underlying cause is addressed, poor fitment complaints usually reduce or disappear. Technicians often replace this part after finding wear, cracking, or a poor fit during inspection. Small components can create big downtime when they loosen, leak, or interfere with movement. Common complaints include worn part issues, intermittent operation, or poor fitment. Recheck fasteners and connectors after the first run-in cycle to confirm everything remains tight. Reinstall carefully so nothing pinches, rubs, or binds once the unit is back together. Once the root cause is corrected, cycle behavior should stabilize and performance should return to normal. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed.