Timer and Switch - Part obsolete, USE 12-2317-26

A reliable repair often starts with the right part number—12-2317-02 corresponds to Timer and Switch Part Obsolete use 12 2317 26. (Note: listing shows obsolete; use 12-2317-26 when applicable.) Order by part number to avoid mismatches. Disconnect power before service and document the original routing or hardware positions with a quick photo. Reinstall carefully so nothing pinches, rubs, or binds once the unit is back together. Once the root cause is corrected, cycle behavior should stabilize and performance should return to normal. Continuity checks and actuator inspection help confirm a bad switch. Switches provide on/off or position feedback used by controls and safety logic. Common complaints include not starting, unit not responding, or no power. Compare the old part to the replacement, paying attention to connector orientation, mounting points, and sealing surfaces. Confirm the symptom first, then inspect the part location for wear, corrosion, cracks, or looseness. A new Timer and Switch Part Obsolete use 12 2317 26 often clears unit not responding issues caused by wear or damage. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed. If the machine was down for a while, take the opportunity to clean the area around the repair. Verify any model compatibility notes shown on the product page before completing the order. Keep the removed part until final testing is complete so you can compare fitment if needed.