THERMOSTAT BIN

Part 02313633 is associated with the Thermostat Bin and is selected when the original part is no longer serviceable. It’s a thermostat replacement and is typically sourced after the failed thermostat bin is confirmed. Verify fitment by part number 02313633 and physical layout on the unit—small revision changes can matter. Functionally, it regulates temperature cut-in/cut-out behavior; when it fails, the machine may not behave normally. Common service complaints for the thermostat bin include won’t heat properly, incorrect cut?out, and won’t cool properly. Once the fault is isolated to the thermostat bin, replacement typically resolves the complaint. A clean repair starts with diagnosis—similar symptoms can come from other parts. To verify whether the thermostat bin is at fault, technicians may: check for calibration drift; confirm sensing location and mounting. After confirmation, replacing the thermostat bin with part 02313633 restores the affected function and stabilizes operation. After diagnosis, the last step is a correct replacement and post-repair test. Compare the old thermostat bin to part 02313633, install with standard service practices, then verify with a test cycle. Once part 02313633 is installed and tested, the unit should return to normal performance with fewer intermittent issues. Keep the removed part nearby for a quick side-by-side comparison during installation. Document the symptom and the post-repair test result for future service history. Keep the removed part nearby for a quick side-by-side comparison during installation. After the first test cycle, recheck hardware and connectors to confirm everything remains secure. Document the symptom and the post-repair test result for future service history. If the unit has multiple revisions, confirm the exact configuration to avoid mismatched parts. If the unit has multiple revisions, confirm the exact configuration to avoid mismatched parts. Keep the removed part nearby for a quick side-by-side comparison during installation.