Panel Splash - Part obsolete, USE 02-3878-31

If the symptom is worn labels, inspect the part location for looseness, rubbing marks, mineral buildup, and any secondary damage to nearby parts. After replacement, run at least one full cycle and recheck for leaks, vibration noise, and fasteners that loosen during operation. Multiple brands Panel Splash is listed under part number 02-3878-01 for ice maker service and replacement work. The listing indicates this part is superseded by 02-3878-31. Panels and interfaces protect components and provide control access. Damage can cause poor fitment, worn markings, or controls that are hard to use. A short post-repair check—visual inspection plus a full cycle—helps confirm the issue is resolved without introducing new leaks or noise. Once the root cause is corrected, performance should stabilize and output should return to normal. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces.