Valve Stem Assembly

Multiple brands Valve Stem Assembly is listed under part number 02-3790-12 for ice maker service and replacement work. Valves regulate water flow during fill events. If a valve sticks, the machine may underfill, overfill, or behave inconsistently from cycle to cycle. If the symptom is overfill, inspect the part location for looseness, rubbing marks, mineral buildup, and any secondary damage to nearby parts. If the fault changes with vibration or after moving panels, look for borderline fitment and loose connectors in the same area. A short post-repair check—visual inspection plus a full cycle—helps confirm the issue is resolved without introducing new leaks or noise. Once the root cause is corrected, performance should stabilize and output should return to normal. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly.