DRAIN ASSEMBLY- BH16

If you’re troubleshooting standing water on a Multiple brands unit, the Drain Assembly BH16 (part 02-3769-01) is a common replacement item. Model reference(s) in the listing name include BH16. Match the part number 02-3769-01 to the old component before ordering, then reinstall with careful alignment and routing. Once the root cause is corrected, performance should stabilize and output should return to normal. Drain components guide melt water out of the unit. When the drain path leaks or backs up, you’ll see pooling, overflow, or wet-floor complaints. If the symptom is standing water, inspect the part location for looseness, rubbing marks, mineral buildup, and any secondary damage to nearby parts. After replacement, run at least one full cycle and recheck for leaks, vibration noise, and fasteners that loosen during operation. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period. If the part interacts with water, do a leak check during the first run and again after a short operating period. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period.