Drain Adaptor - Part obsolete, USE 02-3692-22

Use part 02-3692-02 when ordering the Multiple brands Drain Adaptor for repair and maintenance. The listing indicates this part is superseded by 02-3692-22. Drain components guide melt water out of the unit. When the drain path leaks or backs up, you’ll see pooling, overflow, or wet-floor complaints. Match the part number 02-3692-02 to the old component before ordering, then reinstall with careful alignment and routing. Replacing a worn part early can prevent secondary damage to nearby components. If the symptom is standing water, inspect the part location for looseness, rubbing marks, mineral buildup, and any secondary damage to nearby parts. If the fault changes with vibration or after moving panels, look for borderline fitment and loose connectors in the same area. If the part interacts with water, do a leak check during the first run and again after a short operating period. If the part interacts with water, do a leak check during the first run and again after a short operating period. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. Take a photo before disassembly so you can confirm orientation and fastener locations during reassembly. If the part interacts with water, do a leak check during the first run and again after a short operating period. Clean the area around the repair so debris doesn’t interfere with fitment or sealing surfaces. If the part interacts with water, do a leak check during the first run and again after a short operating period.